NIST ships first programmable AC/DC 10-volt standard

NIST ships first programmable AC/DC 10-volt standard
Integrated circuit for NIST's new programmable AC/DC 10-volt standard. The chip contains about 300,000 superconducting Josephson junctions (located along horizontal lines at right-center of micrograph). Credit: NIST

Extending its 26-year tradition of innovative quantum voltage standards, researchers at the National Institute of Standards and Technology (NIST) have begun shipping a new 10-volt standard to users around the world. The programmable system measures both direct current (DC) and alternating current (AC) voltages.
NIST AC/DC 10-volt standard chip.

The new 10-volt system* builds on a number of previous NIST inventions, from the initial 1-volt standard in 1984 through the 2006 unveiling of the world's first precision instrument for directly measuring AC voltages.** Because the measurements are made using integrated circuits based on and simple equations that can be reproduced reliably, NIST quantum voltage standards represent a major advance over historical artifact standards, which were essentially chemical batteries that were influenced by environmental conditions and sometimes drifted over time.

About 50 standards labs, military organizations, and private companies worldwide calibrate voltmeters using standards based on earlier generations of NIST-developed technology. Products made with these instruments range from compact disc players to missile guidance systems.

The new technology relies on superconducting containing about 300,000 Josephson junctions, whose ensures that every junction produces exactly the same voltage. Quantum voltage standards are based on the Josephson effect, observed when two are separated by a thin insulating or resistive film and a current tunnels through the barrier (or junction). When of a known frequency is applied, the junction generates a voltage that can be calculated based on that frequency and two fundamental constants of nature.

The new standard offers unique advantages over previous generations. For DC metrology, benefits include higher immunity to noise (interference), output stability, and ease of system setup and operation. The system also enables a wider range of applications by producing AC waveforms for accurately calibrating AC signals with frequencies up to a few hundred hertz. A key advance is the use of junctions with metal-silicide barriers that produce stable steps and have uniform electrical properties. The system also incorporates new electronics, automation software, and measurement techniques.

The first system was shipped to the Kennedy Space Center in Florida earlier this month, and others are on order by laboratories in Brazil and Taiwan.

More information: * C.J. Burroughs, P.D. Dresselhaus, A. RÜfenacht, D. Olaya, M.M. Elsbury, Y. Tang and S.P. Benz. "NIST 10 V programmable Josephson Voltage Standard System." Presented at the Conference on Precision Electromagnetic Measurements, Daejon, Korea, June 14, 2010.
** See NIST newsletter article "Road to AC Voltage Standard Leads to Important Junction" at www.nist.gov/pml/road_062006.cfm

Citation: NIST ships first programmable AC/DC 10-volt standard (2010, October 27) retrieved 16 May 2024 from https://phys.org/news/2010-10-nist-ships-programmable-acdc-volt.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Road to AC voltage standard leads to important junction

0 shares

Feedback to editors