The robot that climbs in the pipe

In the main, today’s robots are not that clever. They cannot climb or navigate in vertical pipes – and very few have active joints.

Cybernetics and optical measurement scientists at SINTEF are working on a solution.

Navigation by light and image
With experience and knowledge acquired with snake robots Anna Konda and AiKo as a starting point, a team is now developing an intelligent pipe inspection robot on wheels that will be able to climb, navigate intersections and at any given time know its location in the pipe system.

The inspection robot will be able to move in pipes of various diameters, right down to 20 cm. Cybernetics scientists are developing the propulsion system while a team of optics scientists is working on the new robot’s visual system.

“We are currently developing the vision system than will enable the robot to navigate,” says Jens Thielemann at SINTEF ICT. “In the meantime, we are using the lego robot Mindstormer to collect the data to train the vision system. This lego robot has a camera attached and moves around the pipe following a pre-programmed map. The next step will be to utilise the vision system as input to control the actual snake robot we are going to develop.”

The camera that will provide the new robot’s vision is an off the shelf time-of-flight camera that provides a bathymetric chart of the pipe system using inflected light.
“Combined with our algorithms, the robot will be able to navigate and move forward on its own,” says Thielemann. “The robot knows when a left or right turn is approaching and also contains a built-in path description detailing what tasks it should carry out in different situations.

Functions as a train
“Given our previous work on snake robots, we have become good at controlling mechanisms that are linked,” says SINTEF cybernetics scientist Erik Kyrkjebø.

“We now want to develop a robot with 10-11 joint modules, each with an identical pair of wheels cast in plastic. The weight must be well distributed between the joints. For example, can we put the camera and accelerator motor in two different joint modules? The robot will function as a train when operating horizontally. Such robots already exist, but we want to develop a robot that can climb too.”

The scientists have designed several versions of the pipe inspection robot and have tested different solutions in order to make the new robot both mobile and compact. They have now come up with a design they have faith in.

Twisting upwards
When the robot enters a vertical pipe, it lifts its head in the pipe and meets the pipe wall. It can then either move sideways with its abdomen against the pipe and twist itself upwards or it can topple backwards, attach itself to the pipe wall, in the same way as we would put our feet against a shaft wall to hold on, and then roll upwards.

The scientists emphasise that the project is at the design stage. In June, two of the 11 joint modules will be tested to verify the concept and they hope to demonstrate a prototype model by the end of the year. This comprises just phase one of an industrial development, but the enthusiastic scientists are confident of succeeding in the foreseeable future. The final version of the robot will be constructed of aluminium and is planned to be 1.5 m long.

Source: Aase Dragland