Sandisk Unleashes World's Fastest MLC SSD Family

Designed as drop-in replacements for hard-disk drives (HDDs) in notebook PCs, the initial members in the SanDisk G3 family are SSD C25-G3 and SSD C18-G3 in the standard 2.5” and 1.8” form factors respectively, each available with a SATA-II interface. Available in capacities of 60, 120 and 240GB, the unit MSRPs are $149, $249 and $499, respectively.

The G3 SSDs are more than five times faster than the fastest 7,200 RPM HDDs and more than twice as fast as SSDs shipping in 2008, clocking in at 40,000 vRPM1 and anticipated sequential performance of 200MB/s read and 140MB/s write3. The G3 SSDs provide a Longterm Data Endurance (LDE) of 160 terabytes written (TBW) for the 240GB version, sufficient for over 100 years of typical user usage. (2,3)

“SanDisk’s G3 SSD has met the demand of a 120GB SSD at less than $250 with an exceptional user experience” said Rich Heye, sr. vp and general manager, Solid State Drives (SSD) business unit, SanDisk. “Three key features developed by SanDisk enable this new design: a new SSD algorithm called ExtremeFFSTM allows random write performance to potentially improve by as much as 100 times over conventional algorithms; reliable 43nm multi-level cell (MLC) all bit-line (ABL) NAND flash; and SanDisk’s new SSD controller, which ties together the NAND and the algorithm.”

SanDisk’s flash technology is produced at fabrication plants in Yokkaichi, Japan, where SanDisk and its partner, Toshiba Corporation, share the output. The SSD controller and firmware were designed by SanDisk expressly for the G3 SSD.

Provided by Sandisk