Superfast airplanes through super tiny technology

July 13, 2009 Superfast airplanes through super tiny technology

Enlarge

Princeton engineers will study how fuel additives made of tiny particles of graphene can help supersonic jets fly faster and make diesel engines cleaner and more efficient. To create the graphene particles, the researchers remove carbon dioxide molecules from graphite oxide (top two molecules) which leaves a irregular bond pattern that creates a buckle in the otherwise flat graphene molecule (bottom molecule). This ridge prevents the graphene molecule from folding into ball.

An interdisciplinary team of scientists led by Princeton engineers has been awarded a $3 million grant to study how fuel additives made of tiny particles known as nanocatalysts can help supersonic jets fly faster and make diesel engines cleaner and more efficient.

Composed of snippets of molecular sheets carbon only a few Angstroms thick, the have been shown to help fuels ignite and burn faster, a quality that could usher in the next generation of combustion engines. The Princeton team hopes to better understand why the nanocatalyst help fuels ignite and what kinds of particles would work best for building the engines of the future.

“Right now we don’t know what actual reactions enhance the combustion rates when the particles are added to fuels,” said Ilhan Aksay, a professor of chemical engineering at Princeton and the lead investigator on the project. “If we understand it further, we can make it more effective.”

The funding, which comes from the Air Force as part of the 2009 American Recovery and Reinvestment Act Research Program, will be used to tackle a fundamental barrier to designing faster supersonic aircraft. For aircraft already flying quicker than the speed of sound to travel even faster, their engines must operate at faster speeds and fuel must move through them more rapidly, but the ignition time and burn rate of current limits the speed of the engines.

“To fly at highly supersonic speeds one needs to run the propulsion system at supersonic speed to maximize its efficiency but there is little time to mix, ignite and extract energy from the fuel,” said Richard Yetter, a professor of mechanical engineering at Pennsylvania State University who is a principal investigator on the project. “To make the planes go faster, we need to burn fuel faster.”

The Princeton-led team has proposed a solution based on the use of graphene, molecular sheets of . In 2003, Aksay and his chemical engineering colleague, Professor Robert Prud’homme, developed the first commercially viable technique for making graphene by using a chemical process to split graphite into its ultrathin individual sheets. The resulting flakes are 200- to 500-nanometers wide, making the largest of them about one-hundredth the width of an average human hair.

Graphene exhibits unusual physical and electrical properties and has been lauded for its potential in ultrafast and light electronic technologies such a computers and digital displays. Aksay and his colleagues are hoping to leverage another characteristic of the graphene particles: when small amounts are added to liquid fuels, they lower the temperature at which the fuel ignites.

“The concentration of the nanocatalyst in the fuel would be very small,” Aksay said. “The idea of being able to put in a very small quantity and have such a dramatic effect is important.“

The catalyst might also be used to reduce the amount of nitric oxide produced by diesel engines or accelerate soot oxidation rates, which could reduce the pollution and fuel use. The graphene particles might also be used in liquid propellants for thrusters that help satellites position themselves in space.

Aksay said his research team blends expertise in various fields. It includes several other Princeton professors: Annabella Selloni and Roberto Car , from the Department of Chemistry, and Frederick Dryer, of Mechanical and Aerospace Engineering. Additional researchers from other universities include: Mark Barteau of chemical engineering from the University of Delaware; Jennifer Wilcox, from Energy Resources Engineering at Stanford University; and Michael Zachariah, of mechanical engineering and chemistry at the University of Maryland.

“This is a truly interdisciplinary project,” Aksay said. “Nowadays the research is so collaborative, if you sit in your office and work all by yourself, you will miss out on a lot.”

Provided by Princeton University (news : web)


print this article email this article download pdf blog this article bookmark this article     Stumble it Digg this share on Facebook retweet share on Reddit add to delicious
Rate this story - 4 /5 (4 votes)


July 13, 2009 all stories

Comments: 0

4 /5 (4 votes)
  • Stumble this up

  • Digg this

  • share this

  • hide
  • Related Stories




  • hide
  • Relevant PhysicsForums posts

  • Heat pipe for high temperature
    created 7 hours ago
  • Robot built out of acrylic
    created 17 hours ago
  • Thickness or Ga. of Stainless steel water tank?
    created 18 hours ago
  • dynamic hardness measurements
    created Nov 21, 2009
  • May i know is structure such as bcc, fcc depends on how it process?
    created Nov 21, 2009
  • Wear patterns
    created Nov 18, 2009
  • More from Physics Forums - Materials & Chemical Engineering

Other News

Fast, easy, and highly sensitive arsenic detection with gold nanoparticles

Nanotechnology / Nanomaterials

created 2 hours ago | popularity not rated yet | comments 0

(PhysOrg.com) -- Mention of arsenic poisoning usually brings to mind underhanded murder. However, the danger of arsenic poisoning from contaminated drinking water is far greater. Low concentrations of arsenic are found in ...


Nanotech in Space: Experiment To Weather the Trials of Orbit

Nanotech in Space: Experiment To Weather the Trials of Orbit

Nanotechnology / Nanomaterials

created 14 hours ago | popularity 4 / 5 (2) | comments 0

Novel nanomaterials developed at Rensselaer were sent into orbit on Nov. 16 aboard Space Shuttle Atlantis.


Water droplets direct self-assembly process in thin-film materials

Nanotechnology / Nanomaterials

created Nov 23, 2009 | popularity 5 / 5 (4) | comments 2

You can think of it as origami - very high-tech origami. Researchers at the University of Illinois have developed a technique for fabricating three-dimensional, single-crystalline silicon structures from thin films by coupling ...


Nanotube defects equal better energy and storage systems

Nanotube defects equal better energy and storage systems

Nanotechnology / Nanomaterials

created Nov 19, 2009 | popularity 4.4 / 5 (10) | comments 2

(PhysOrg.com) -- Most people would like to be able to charge their cell phones and other personal electronics quickly and not too often. A recent discovery made by UC San Diego engineers could lead to carbon ...


Peptides control crystal growth with 'switches, throttles and brakes'

Peptides control crystal growth with 'switches, throttles and brakes'

Nanotechnology / Bio & Medicine

created Nov 23, 2009 | popularity 5 / 5 (3) | comments 0

(PhysOrg.com) -- By producing some of the highest resolution images of peptides attaching to mineral surfaces, scientists have a deeper understanding how biomolecules manipulate the growth crystals. This research ...