Magazine touts NJIT idea to harness clean energy for NYC

July 14, 2009

An NJIT architecture professor with an architecture student has designed a network of modular floating docks to harness clean energy for New York City. The proposal was featured this week in Metropolis magazine.

According to Richard Garber, a professor of architecture at the College of Architecture and Design at NJIT and his student Brian Novello, the tidal action of New York City rivers would be strong enough to run the system.

The docking stations would plug into the conventional piers of New York City. Eventually, the piers would be extended further into the river to optimize clean energy generation while increasing public green space and tidal pools for wildlife. The system would encourage energy awareness by the increased visibility of the connection between the water's edge and the city's interior.

The stations would alleviate the need for conventional power to light the city streets. Three vertical turbines fastened to the underside of modular floating dock units would harness river currents. Each module could generate up to 24 kilowatts of constant energy created by the bi-directional four mph current, supporting 350 LED streetlamps.

This is an important idea because it relates to the current work aimed at reclaiming access to New York City's 578 miles of waterfront. The relationship of the river to the city, not simply its edges, is at the core of the proposal. What if the creation of a modular docking system to expand public access to the rivers and create recreational opportunities could actually produce energy by utilizing the flow of river currents? Energy produced could then be fed back to the city's power grid through existing underground transmission lines to power urban infrastructure--in this case, streetlamps.

There is already precedent for turbines creating energy in the waters off though the Roosevelt Island Tidal Energy project (RITE). However, this new scheme would generate a similar amount of energy while creating new public spaces and tidal pools through which expanded contact with river-based programs could occur.

Unlike windmills, which have garnered "not in my backyard" responses because of various negative impacts (visual obstructions, increased noise, danger to migrant bird populations; underwater turbines cannot be seen or heard. But there is another side: Windmills and other energy-producing products permit a visual understanding of power generation via an effect (they literally move, rotate, etc.). Turbines, though, are out of sight. The floating, programmable surface of docking stations would serve to link energy production with a physical space and the effect of powering the city.

Source: New Jersey Institute of Technology


print this article email this article download pdf blog this article bookmark this article     Stumble it Digg this share on Facebook retweet share on Reddit add to delicious
Rate this story - 1 /5 (1 vote)


July 14, 2009 all stories

Comments: 0

1 /5 (1 vote)
  • Stumble this up

  • Digg this

  • share this

  • hide
  • Related Stories

  • Mersey River tidal power station proposed
    created Nov 22, 2005 | popularity not rated yet | comments 0
  • Solar Lily Pads Gently Floating And Gathering Energy on the River Clyde
    created May 13, 2008 | popularity not rated yet | comments 0
  • Oxford turbines to harvest energy from tides
    created Sep 10, 2008 | popularity not rated yet | comments 0
  • Tide machines may be major power sources
    created Jun 01, 2006 | popularity not rated yet | comments 0
  • MIT designs 'invisible,' floating wind turbines
    created Sep 18, 2006 | popularity not rated yet | comments 0



  • hide
  • Relevant PhysicsForums posts

  • Control System
    created Nov 24, 2009
  • Base Isolation Systems in Skyscrapers?
    created Nov 23, 2009
  • Need to interview a Computer Hardware Engineer for school project
    created Nov 23, 2009
  • transient heat transfer
    created Nov 23, 2009
  • More from Physics Forums - General Engineering

Other News

Design chosen for British 1,000 mph car

Design chosen for British 1,000 mph car (w/ Video)

Technology / Engineering

created 5 hours ago | popularity 5 / 5 (2) | comments 1

(PhysOrg.com) -- A British team hoping to be the first to get a car to 1,000 mph (1,610 km/h) has made its final design selection. The six-tonne car, known as the Bloodhound, will be powered by a Eurofighter ...


EU assembly adopts Internet, phone user rights

Technology / Telecom

created 1hour ago | popularity not rated yet | comments 0

(AP) -- The European Parliament has endorsed new telecom rules that would give phone and Internet users more rights and allow them to appeal to national courts if they are cut off for illegal file-sharing.


Magic box for mission impossible

Technology / Telecom

created 3 hours ago | popularity not rated yet | comments 0

On September 11, firefighters, police officers and ambulance workers faced a terrifying rescue effort in the World Trade Center complex. They battled to save people from the collapsing Twin Towers, searched for survivors, ...


Taking the drudgery out of software development

Taking the drudgery out of software development

Technology / Software

created 19 hours ago | popularity 3.6 / 5 (10) | comments 7

(PhysOrg.com) -- Software developers will no longer have to reinvent the wheel when writing new programs and applications thanks to a clever new set of tools and a central repository of 'building blocks'.


Selling chip makers on optical computing

Selling chip makers on optical computing

Technology / Semiconductors

created 23 hours ago | popularity 4.7 / 5 (9) | comments 1

(PhysOrg.com) -- Computer chips that transmit data with light instead of electricity consume much less power than conventional chips, but so far, they've remained laboratory curiosities. Professors Vladimir ...