Eco-friendly building techniques don't have to significantly raise construction costs

November 9, 2009 By Mary Beth Breckenridge

Home builder Lance Schmidt hears it all the time: Green building costs more. But he and his colleagues are out to prove otherwise.

Schmidt is one of two general contractors on Mythbuster 2009, a demonstration home being built in Akron's Kenmore neighborhood to show that environmentally conscious building practices are feasible even in modestly priced homes.

The approximately 1,200-square-foot home will have a of $92,000, yet it will meet the National Association of Home Builders' green building standards and the government's Energy Star criteria. Its monthly gas bill is expected to average about $38 a month, far less than what's typical for a home that size.

''The attitude that green costs more -- I'm gonna bust it to death,'' Schmidt said during a tour of the for industry professionals, public officials, students and others.

The house is a joint project of the Home Builders Association Serving Portage & Summit Counties (Ohio) and the nonprofit Urban Neighborhood Development Corp., which builds affordable housing in Akron on lots that once were vacant or held dilapidated homes.

Schmidt, a green-building advocate and project manager at F.G. Ayers Inc., is sharing general contracting duties with Steve Miller of Rembrandt Homes.

The idea behind the house is to show the public and those in the construction industry how building materials can be conserved, construction waste minimized and a home's energy-efficiency improved, all without significantly increasing the cost. And because students in the Akron Public Schools' Education in Action program are involved in the construction, it's also an opportunity to teach green building techniques to the next generation of tradespeople.

To achieve those environmental benefits, the builders are using a number of construction methods that aren't standard in the industry.

For example, the floor joists are 2-by-8s spaced 19.2 inches apart on center instead of the usual 16 to save wood -- a method that's possible because the oriented strand board that lays atop those joists is more than strong enough for that spacing, Schmidt explained. The wall studs are 2-by-6s spaced 24 inches on center, a method that not only cuts down on lumber but creates more room for insulation.

Additional insulation space was created by using raised heel trusses, a technique that involved attaching scrap pieces of 2-by-4s to the roof trusses to raise them a few inches above the plate that tops the exterior walls.

The truss method added nothing to the construction cost, Schmidt noted, but it's not widely used. ''See, most builders don't think that way,'' he said.

Other eco-friendly elements will include insulation on the outside of the foundation and a furnace that's 95 percent efficient and fairly small, since the house will be so well sealed and insulated. Lumber from an old warehouse may be remilled for use as flooring in part of the home.

The house also has a radon collection system, which is essentially a vent pipe tied into the footer drain to carry off any radon that might enter the house. It cost about $100 to install, Schmidt said -- far cheaper than the cost of mitigation if radon were found after the home was built.

Some of the home's cost savings are coming from savvy purchasing. Schmidt, for example, bought house wrap at a fraction of the usual cost because it was printed with the name of a construction company that went bankrupt after ordering it.

Construction waste is sorted and recycled, an effort that saves money on Dumpster rental and greatly reduces what ends up in landfills. Areas of the side yard are marked for collecting various types of materials, most of which are taken to recyclers. The wood scraps are chipped and used to heat Schmidt's home.

Further on in the construction process, the house will undergo a blower-door test, which will pinpoint places where air can escape.

Sealing those leaks will not only keep conditioned air inside the house, but it will also eliminate the air movement that makes people feel cold as the air moves across their skin. That allows the house to be comfortable at a lower temperature, explained Karl S. Balla, the energy rater who will do the testing.

Balla, who owns Energy Pros of Ohio in Richfield, will also test the heating and cooling ducts to measure air leakage there. Sealing any remaining leaks with duct mastic will ensure that conditioned air isn't lost in the basement or wall cavities on its way to its destination.

The local Home Builders Association hopes to open the house to the public before it's sold and hold events there so its members can see and discuss the construction methods, said Carmine Torio, the group's executive vice president.

''There's a lot of things that can be done, but it's an education,'' he said.

Some of that education is hard-earned, Schmidt admitted. He pointed out that the oriented strand board covering the home's exterior walls has bowed in spots, because it wasn't installed with an eight-inch gap between pieces to allow for swelling as the board absorbs moisture from the air. That mistake will be rectified, he said, but he's hoping to turn it into a learning opportunity by bringing in framers to see the mistake and learn the proper technique for installing board.

Eventually the house will be offered for sale by the Urban Neighborhood Development Corp.

But that won't be the end of the green-building focus by the two sponsoring organizations, the HBA and the UNDC.

Schmidt, who is vice president of the local HBA and takes over as president next year, pledged to use his office to continue educating his fellow builders on green techniques. And he hopes that in the next year the two organizations can collaborate on construction of a prototype net-zero house, one that is super efficient and has a small solar-energy system to produce electricity so its net energy consumption is zero.

Those kinds of projects involve changing long-held beliefs, and that's not always easy, Schmidt conceded. But to his way of thinking, ''isn't it the right thing to do?''
___

(c) 2009, Akron Beacon Journal (Akron, Ohio).
Visit Akron Beacon Journal Online at http://www.ohio.com/
Distributed by McClatchy-Tribune Information Services.-

4.7 /5 (3 votes)  

Filter


Move the slider to adjust rank threshold, so that you can hide some of the comments.


Display comments: newest first

jerryd
Nov 09, 2009

Rank: not rated yet

Great ideas but wood isn't the best way to build a home inexpensively for the long haul. Far better is ferro-cement/foam sandwich which can be built in a factory then assembled on site similar to SIP wood/foam panels.

It can be made hurricane/tornado proof and is well sealed from the start. By not being termite food or get dry rot it will last far longer.

Now the solar PV panels, other RE have dropped in price to $2.38/wt and or solar thermal, wind generators no reason a $90k/1200sq' home can be a zero energy one. Over the life of the home these could pay for it in energy savings or even profit from energy sales.

Now add a EV to this and you can make it's fuel too cutting living costs.
RkeyTeq
Nov 10, 2009

Rank: not rated yet
I designed and built a 1800 sq ft house that uses 80% less energy, 60% less water, and cost 30% less to build. Some energy saving measures don't cost a penny. Natural ventilation, passive heating, water saving and recycling, well selected vegetation, and other simple measures didn't cost anything, except for some design thought and consideration.
I also saved money by collecting the stone cladding directly from the site (saves on brick) and using recycled materials (scrap sheet metal for gutters and flashing, salvaged wood, etc.).
The biggest energy and money saver, though, was designing a compact house that fits into a simple rectangle. Framing contractors were bidding for 20% less than estimated, and it reduced my heat load by about 30% from a more rambling design. Investing about $100 in good caulk also saved significant heating. The 1800 sq ft is big enough to fit 4 bedrooms (one master), 3 full baths, separate living and dining rooms, roomy kitchen, and an office/guest room.
Rank 4.7 /5 (3 votes)
Related Stories
Relevant PhysicsForums posts
  • Need help reading 3-D
    created15 hours ago
  • A way to send and receive wireless data
    created21 hours ago
  • Calling function with no input argument
    createdFeb 10, 2012
  • Force free body diagram problem on gym equipment
    createdFeb 10, 2012
  • Empirical data regarding shower heads and water
    createdFeb 10, 2012
  • feed hold button on CNC lathe
    createdFeb 09, 2012
  • More from Physics Forums - General Engineering

More news stories

Google might launch Drive for cloud storage soon

(PhysOrg.com) -- Google's next big move, according to the Wall Street Journal, is a cloud storage service called Drive. Hardly first to the plate, Google is simply catching up to introducing its cloud reposi ...

Technology / Internet

created 4 hours ago | popularity 4.5 / 5 (2) | comments 2 | with audio podcast report

Love a click away in Indonesia's Twitter Republic

He was a geeky kid from Yogyakarta, she a glamorous city girl in Jakarta. In a country with one of the world's most vibrant social networking scenes they fell in love on Twitter.

Technology / Internet

created 5 hours ago | popularity not rated yet | comments 0

Europeans protest controversial Internet pact

Tens of thousands of people marched in protests in more than a dozen European cities Saturday against a controversial anti-online piracy pact that critics say could curtail Internet freedom.

Technology / Internet

created 20 hours ago | popularity 4.6 / 5 (9) | comments 0

Walney offshore wind farm is world's biggest (for now)

(PhysOrg.com) -- The Walney wind farm on the Irish Sea--characterized by high tides, waves and windy weather--officially opened this week. The farm is treated in the press as a very big deal as the Walney ...

Technology / Energy & Green Tech

created Feb 11, 2012 | popularity 4 / 5 (11) | comments 34 | with audio podcast weblog

Navy to begin tests on electromagnetic railgun prototype launcher

The Office of Naval Research (ONR)'s Electromagnetic (EM) Railgun program will take an important step forward in the coming weeks when the first industry railgun prototype launcher is tested at a facility ...

Technology / Engineering

created Feb 06, 2012 | popularity 4.7 / 5 (16) | comments 92 | with audio podcast


Latin America mining boom clashes with conservation

Latin America is experiencing a mining boom as prices rise fuelled by a hike in global demand, but the region is also being hit by a wave of violent protests, strikes and rallies by environmentalists.

Explained: Sigma

It's a question that arises with virtually every major new finding in science or medicine: What makes a result reliable enough to be taken seriously? The answer has to do with statistical significance -- but ...

Political leaders play key role in how worried Americans are by climate change: study

More than extreme weather events and the work of scientists, it is national political leaders who influence how much Americans worry about the threat of climate change, new research finds.

New power source discovered

(PhysOrg.com) -- Researchers at the Massachusetts Institute of Technology (MIT) and RMIT University have made a breakthrough in energy storage and power generation.

NASA budget will axe Mars deal with Europe: scientists

US President Barack Obama's budget proposal to be submitted next week for 2013 will cut NASA's budget by 20 percent and eliminate a major partnership with Europe on Mars exploration, scientists said Thursday.

Entire genome of extinct human decoded from fossil

(PhysOrg.com) -- In 2010, Svante Pääbo and his colleagues presented a draft version of the genome from a small fragment of a human finger bone discovered in Denisova Cave in southern Siberia. The ...