Innovation puts next-generation solar cells on the horizon

December 1, 2009

In a world first, a Monash University-led international research team has developed an innovative way to boost the output of the next generation of solar cells.

Scientists at Monash University, in collaboration with colleagues from the universities of Wollongong and Ulm in Germany, have produced tandem dye-sensitised with a three-fold increase in energy conversion efficiency compared with previously reported tandem dye-sensitised solar cells.

Lead researcher Dr Udo Bach, from Monash University, said the breakthrough had the potential to increase the energy generation performance of the cells and make them a viable and competitive alternative to traditional silicon solar cells.

Dr Bach said the key was the discovery of a new, more efficient type of dye that made the operation of inverse dye-sensitised solar cells much more efficient.

When the research team combined two types of dye-sensitised solar cell - one inverse and the other classic - into a simple stack, they were able to produce for the first time a tandem solar cell that exceeded the efficiency of its individual components.

"The tandem approach - stacking many solar cells together - has been successfully used in conventional photovoltaic devices to maximise , but there have been obstacles in doing this with dye-sensitised cells because there has not been a method for creating an inverse system that would allow to efficiently pass on positive charges to a when illuminated with light," Dr Bach said.

"Inverse dye-sensitised solar cells are the key to producing dye-sensitised tandem solar cells, but the challenge has been to find a way to make them perform more effectively. By creating a way of making inverse dye-sensitised solar cells operate very efficiently we have opened the way for dye-sensitised tandem solar cells to become a commercial reality."

Although dye-sensitised solar cells have been the focus of research for a number of years because they can be fabricated with relative simplicity and cost-efficiency, their effectiveness has not been on par with high-performance .

Dr Bach said the breakthrough, which is detailed in a paper published in Nature Materials, was an important milestone in the ongoing development of viable and efficient solar cell technology.

"While this new tandem technology is still in its early infancy, it represents an important first step towards the development of the next generation of solar cells that can be produced at low cost and with energy efficient production methods," he said.

"With this innovation we are one step closer to the creation of a cost-efficient and carbon-neutral energy source."

More information: Highly efficient photocathodes for dye-sensitized tandem solar cells, A. Nattestad , A. J. Mozer , M. K. R. Fischer , Y.-B. Cheng , A. Mishra , P. B|[auml]|uerle & U. Bach, Nature Materials (29 November 2009); doi:10.1038/nmat2588

Source: Monash University (news : web)

4.3 /5 (30 votes)  

Filter


Move the slider to adjust rank threshold, so that you can hide some of the comments.


Display comments: newest first

El_Nose
Dec 01, 2009

Rank: 5 / 5 (4)
It would be nice if no one assumed the public all ready new the avg effeciency of a dye sensitised solar cell so when you say there was a 3 fold increase in effeciency you will not wonder what does that put the effeciency at ??
Doug_Huffman
Dec 01, 2009

Rank: 3 / 5 (1)
I know what the standard against which the relative efficiency is compared! Solar energy cannot reach 1350 Watt meter^-2
DozerIAm
Dec 01, 2009

Rank: 5 / 5 (5)
Maybe because the current avg efficiency is so awful, or maybe because they were too lazy to report any real details.

It is hard to tell. The story does give online references but you need to log in to the various periodicals and I didn't have the patience to build accounts to go look this stuff up.

So, thanks Physorg for giving another article with plenty of smoke and mirrors but absolutely no details.
SincerelyTwo
Dec 01, 2009

Rank: not rated yet
Physorg,
Quality Assurance (overall): 5/10
Quality Assurance (this article): 3/10

Honestly, citing sources which require paid subscriptions? You could at least ask for book references or something better.
dachpyarvile
Dec 01, 2009

Rank: 4.5 / 5 (2)
Peak efficiency for this type of photovoltaic is approximately 11%, at close to 0.7 V and nearly 20 mA/cm2. If the information in the above-cited article is true, that would boost potential efficiency above that of silicon-based photovoltaics. This is good news because these photovoltaics do not appear to have the same environmental impact that traditional silicon-based photovoltaics do and will as their use increases. This also is good news. As it is we are dumping GHGs into the atmosphere that are 17,000 and 23,000 times more potent than CO2 respectively to manufacture traditional thin-film photovoltaics!
Uri
Dec 02, 2009

Rank: not rated yet
I know what the standard against which the relative efficiency is compared! Solar energy cannot reach 1350 Watt meter^-2


Actually the 1350 numer is at the top of the atmosphere, so in reality if your cell is at sea level, its probably somewhat closer to 800 Watts / Meter ^2
Uri
Dec 02, 2009

Rank: not rated yet
I know what the standard against which the relative efficiency is compared! Solar energy cannot reach 1350 Watt meter^-2


Actually the 1350 numer is at the top of the atmosphere, so in reality if your cell is at sea level, its probably somewhat closer to 800 Watts / Meter ^2


I'll correct myself, it appears that 1000 watts/ meter squared (at the equator) appears to be the maximum at sea level according to some quick searching. Still most people assume a 30% higher number for the limit.
Sonhouse
Dec 02, 2009

Rank: not rated yet
Peak efficiency for this type of photovoltaic is approximately 11%, at close to 0.7 V and nearly 20 mA/cm2. If the information in the above-cited article is true, that would boost potential efficiency above that of silicon-based photovoltaics. This is good news because these photovoltaics do not appear to have the same environmental impact that traditional silicon-based photovoltaics do and will as their use increases. This also is good news. As it is we are dumping GHGs into the atmosphere that are 17,000 and 23,000 times more potent than CO2 respectively to manufacture traditional thin-film photovoltaics!

They would WISH for an 11% dye cell. The numbers I hear bandied about is more like 2%. So maybe they are getting to 5% with the new work. Nice that they were careful not to give any specific efficiency numbers, eh.
PPihkala
Dec 02, 2009

Rank: not rated yet
In the end it boils down to dollars per watts produced. Any improvement makes them more competitive. Then the real usage platform will dictate whether to use fewer high-efficiency cells or maybe more low-efficiency ones.
fuzz54
Dec 04, 2009

Rank: not rated yet
The efficiency of the tandem cell is 2.42%.

I found it mentioned on this website (at bottom): http://www.uni-ul...lls.html
plasticpower
Dec 06, 2009

Rank: not rated yet
That's what I throught, I remember reading an article that pushing the solar cell efficiency past 10% is a major major challenge and whoever does it will be sitting pretty. So kudos to this discovery. If we really can acheive above 10% efficiency, we will be able to use solar cells in things where they really matter, like electric cars, laptops, cell phones, etc. Not to mention future space stations/craft.
antialias
Dec 07, 2009

Rank: not rated yet
like electric cars, laptops, cell phones


Laptops and cell phones: yes.
Cars: no

With the mentioned 1000W/square meter (max) you'd get a piddly 3-5 kW out of car mounted solar panels (that's at 100% efficiency - now at 10% that boils down to 300-500W! That's less than 1hp). On a cloudy day away from the equator it's much lower. With even a lightweight stree-legal car you aren't going ANYWHERE on that kind of power. You aren't even charging your batteries enough for a short hop to the mall if you leave yor car in the sun all day.
Rank 4.3 /5 (30 votes)
Related Stories
Relevant PhysicsForums posts
  • Stoichiometry
    created22 hours ago
  • Boiling and melting point of impure substances
    created23 hours ago
  • Safe nitrogen compound to decompose a 500 deg C in a furnace?
    createdFeb 09, 2012
  • [ask]electron inside drinking water
    createdFeb 08, 2012
  • How to avoid formation of Lithium Chromate ???
    createdFeb 08, 2012
  • how to choose a reduced or oxidated form in a redox
    createdFeb 08, 2012
  • More from Physics Forums - Chemistry

More news stories

Fool's gold may prove an unlikely alternative to overexploited catalytic materials

Catalytic materials, which lower the energy barriers for chemical reactions, are used in everything from the commercial production of chemicals to catalytic converters in car engines. However, with current catalytic materials ...

Chemistry / Materials Science

created 14 hours ago | popularity 4.4 / 5 (8) | comments 5 | with audio podcast

Unpicking HIV’s invisibility cloak

Drug researchers hunting for alternative ways to treat human immunodeficiency virus (HIV) infections may soon have a novel target—its camouflage coat. HIV hides inside a cloak unusually rich in a sugar ...

Chemistry / Biochemistry

created 14 hours ago | popularity 5 / 5 (5) | comments 0

No entry without protein recycling: Researchers discover new coherence in enzyme transport

The group of Prof. Dr. Ralf Erdmann at the Ruhr-Universität Bochum, Germany, discovered a connection of peroxisomal protein import and receptor export. In the Journal of Biological Chemistry, they disclo ...

Chemistry / Biochemistry

created 14 hours ago | popularity not rated yet | comments 0

Hydrogen from acidic water: Researchers develop potential low cost alternative to platinum for splitting water

A technique for creating a new molecule that structurally and chemically replicates the active part of the widely used industrial catalyst molybdenite has been developed by researchers with the Lawrence Berkeley ...

Chemistry / Materials Science

created Feb 09, 2012 | popularity 4.8 / 5 (14) | comments 14 | with audio podcast

Under the microscope #7

In this video Dr Ingrid Graz shows us a thin layer of gold on top of rubber. Cracks in the gold allow it to stretch and we can use this for stretchable electronics.

Chemistry / Other

created 16 hours ago | popularity not rated yet | comments 0


Google users warned of threat to smartphone wallets

Users of Google smartphone wallets were being warned on Friday that there is a way to crack pass codes intended to thwart thieves from going on illicit shopping sprees.

Anonymous knocks CIA website offline (Update)

The website of the Central Intelligence Agency was inaccessible on Friday after the hacker group Anonymous claimed to have knocked it offline.

New error-correcting codes guarantee the fastest possible rate of data transmission

Error-correcting codes are one of the triumphs of the digital age. They’re a way of encoding information so that it can be transmitted across a communication channel — such as an optical fiber o ...

Humans may have helped the decline of African rainforests 3000 years ago

(PhysOrg.com) -- Large areas of rainforests in Central Africa mysteriously disappeared over three thousand years ago, to be replaced by savannas. The prevailing theory has been that the cause was a change ...

Complex wiring of the nervous system may rely on a just a handful of genes and proteins

Researchers at the Salk Institute have discovered a startling feature of early brain development that helps to explain how complex neuron wiring patterns are programmed using just a handful of critical genes. ...

New power source discovered

(PhysOrg.com) -- Researchers at the Massachusetts Institute of Technology (MIT) and RMIT University have made a breakthrough in energy storage and power generation.