Honda Reveals Technologies Next-Generation ASIMO

Key technologies include:

1) “Posture Control” technology* making it possible to run in a natural human-like way
2) “Autonomous Continuous Movement” technology enabling flexible route to destination
3) Enhanced visual and force sensor technologies enabling smoother interaction with people

1.Posture Control technology:

The combination of newly developed high-response hardware and the new Posture Control technology enables ASIMO to proactively bend or twist its torso to maintain its balance and prevent the problems of foot slippage and spinning in the air, which accompany movement at higher speeds. ASIMO is now capable of running at a speed of 3km/hour. In addition, walking speed has been increased from the previous 1.6 km/hour to 2.5 km/hour.

2.Autonomous Continuous Movement technology:

The next-generation ASIMO can maneuver toward its destination without stopping by comparing any deviation between the input map information and the information obtained about the surrounding area from its floor surface sensor. ASIMO can now autonomously change its path when its floor surface sensor and visual sensors located in its head detect obstacles.

3.Enhanced visual sensor and force sensor technologies allow for smoother interaction with people:

By detecting people’s movements through visual sensors in its head and force (kinesthetic) sensors which have been newly added to its wrists, ASIMO can now move in sync with people allowing it to give or receive an object, shake hands in concert with a person’s movement and step forward or backward in response to the direction its hand is pulled or pushed.

By continuing to advance these new technologies, Honda will pursue development of an ASIMO that will be useful to people.

* More about the new Posture Control technology:

In order to realize “running,” two major obstacles had to be overcome. One was an accurate leap and the absorption of the landing impact, and the second was prevention of the slipping and spinning which accompany movement at higher speeds.

1. Accurate leap and absorption of landing impact:

In order to run, a robot has to be able to repeat the movements of pushing off the ground, swinging its legs forward, landing within a very short time cycle and without any delay, absorbing the instantaneous impact shock of landing. With a newly developed high-speed processing circuit, highly-responsive and high-power motor drive unit, in addition to light-weight and highly rigid leg structure, Honda realized highly accurate and responsive hardware with performance levels more than four times faster compared to that of the previous model.

2. Prevention of spinning and slipping:

Due to reduced pressure between the bottom of the feet and floor, spinning and slipping are more likely to happen right before the foot leaves the floor and right after the foot lands on the floor.

Overcoming the problem of spinning and slipping was the biggest control element challenge related to increasing running speed. Combining Honda’s independently developed theory of bipedal walking control with proactive bending and twisting of the torso, Honda developed a new control theory which enables stable running, while preventing slipping.

Through these technologies, ASIMO is now capable of smooth human-like running at a speed of 3km/hour. Walking speed was increased from the previous 1.6 km/hour to 2.5 km/hour.

When a human runs, the step cycle is 0.2 to 0.4 seconds depending on one’s speed, and the airborne time, when both feet are off the ground, varies between 0.05 to 0.1 seconds. The step cycle of ASIMO is 0.36 seconds with an airborne time of 0.05 seconds, which are equivalent to that of a person jogging.