Rapid One-Pot Syntheses Developed For Quantum Dots

September 9, 2005 Rapid One-Pot Syntheses Developed For Quantum Dots

Efficient and highly scalable new chemical synthesis methods developed at the University at Buffalo's Institute for Lasers, Photonics and Biophotonics have the potential to revolutionize the production of quantum dots for bioimaging and photovoltaic applications.

Image: A confocal microscope image shows quantum dots, developed at UB, uptaken by cancer cells.

A patent has been filed on the methods, which were described last month in papers in the Journal of the American Chemical Society and Applied Physics Letters.

Quantum dots are tiny semiconductor particles generally no larger than 10 nanometers that can be made to fluoresce in different colors depending on their size. Scientists are interested in quantum dots because they last much longer than conventional dyes used to tag molecules, which usually stop emitting light in seconds. Quantum dots also are of great interest for energy applications because they can produce electrons when they absorb light, making possible extremely efficient solar-energy devices.

Both fabrication methods developed by the UB researchers involve using a single container, or "pot," and take just a few hours to prepare.

The UB scientists report that one of their rapid-solution synthesis methods enabled them to prepare robust, water-dispersible quantum dots for bioimaging, while the other one allowed them to prepare organically soluble quantum dots ready to be sequestered into a polymer host.

The new synthesis methods are truly scalable and can be used to produce large quantities of quantum dots, according to Paras N. Prasad, Ph.D., executive director of the UB Institute for Lasers, Photonics and Biophotonics, SUNY Distinguished Professor in the Department of Chemistry, and co-author on both papers.

"This fast-reaction chemistry will allow us to exploit the true potential of quantum dots, whether it be for delivery into human cells for imaging biological processes in unprecedented detail or for the development of far more efficient devices for solar conversion," he said.

On Aug. 17, the UB researchers reported in a paper in the Journal of the American Chemical Society what is believed to be the first successful demonstration of so-called III-V semiconductor quantum dots as luminescence probes for bioimaging that appear to be non-toxic. "Three-five," and other such classifications refer to the position on the periodic table of the elements that make up semiconductors.

Until now, only II-VI quantum dots have been produced for these applications. However, they are highly toxic to humans.

Composed of indium phosphide, the nanocrystals developed at UB demonstrate luminescence efficiencies comparable to other quantum dots, but they also emit light in longer wavelengths in the red region of the spectrum.

"This is a key advantage because red-light emission means these quantum dots will be capable of imaging processes deeper in the body than commercially available quantum dots, comprised of cadmium selenide, which emit mostly in the lower wavelength range," said Prasad.

Like those cadmium selenide quantum dots, the nanocrystals also exhibit two-photon excitation, absorbing two photons of light simultaneously, which is necessary for high-contrast imaging.

The UB group's quantum dots are composed of an indium phosphide core surrounded by a zinc selenide shell to protect the surface. An organic group then is attached to this shell, as well as a targeting group, in this case, folic acid. Folate receptors are targeted commonly by drugs in diseases such as cancers of the breast, ovary, prostate and colon.

In their experiments, UB researchers showed that the quantum dot system recognized the folate receptor and then penetrated the cell membrane, Prasad explained.

The entire system is water dispersible, which is critical, Prasad said, if quantum dots are to be widely used for bioimaging.

The other scalable chemical fabrication procedure developed by the UB researchers allowed them to prepare quantum dot-polymer nanocomposites that absorb photons in the infrared region.

The work was described in the paper, "Efficient photoconductive devices at infrared wavelengths using quantum dot-polymer nanocomposites," published online Aug. 11 in Applied Physics Letters.

"Current solar cells act only in the green region, thus capturing only a fraction of the available light energy," Prasad said. "By contrast, we have shown that these lead selenide quantum dots can absorb in the infrared, allowing for the development of photovoltaic cells that can efficiently convert many times more light to usable energy than can current solar cells."

In addition to broadening the applications for solar energy in general, the UB research is likely to have applications to nighttime imaging systems used by the military that must absorb and emit light in the infrared.

"Because of the efficient photon harvesting ability of quantum dots, in the immediate future we will be able to incorporate a few different types of them simultaneously into a plastic host material so that an efficient and broad band active solar device is possible," said Yudhisthira Sahoo, Ph.D., research assistant professor in the UB Department of Chemistry and co-author on the APL paper.

Co-authors with Prasad on the paper in the Journal of the American Chemical Society are Dhruba J. Bharali, Ph.D., and Derrick W. Lucey, Ph.D., postdoctoral associates, and Haridas E. Pudavar, Ph.D., senior research scientist, all of the Department of Chemistry in the UB College of Arts and Sciences, and Harishankar Jayakumar, a graduate student in the Department of Electrical Engineering in the UB School of Engineering and Applied Sciences.

The research was supported by a Defense University Research Initiative in Nanotechnology (DURINT) grant from the Air Force Office of Scientific Research and by the John R. Oishei Foundation, as well as by UB's New York State Center of Excellence in Bioinformatics and Life Sciences.

Co-authors with Prasad and Sahoo on the Applied Physics Letters paper are K. Roy Choudhury, graduate student in the Department of Physics in the UB College of Arts and Sciences, and T.Y. Ohulshanskyy, Ph.D., senior research scientist in the UB Department of Chemistry. The research was supported by the DURINT grant and by the National Science Foundation.

Research at UB's Institute for Lasers, Photonics and Biophotonics has been supported by special New York State funding sponsored by State Sen. Mary Lou Rath.

Source: University at Buffalo


print this article email this article download pdf blog this article bookmark this article     Stumble it Digg this share on Facebook retweet share on Reddit add to delicious
Rate this story - 5 /5 (1 vote)


September 9, 2005 all stories

Comments: 0

5 /5 (1 vote)
  • Stumble this up

  • Digg this

  • share this

  • hide
  • Related Stories

  • Nanosize Rods Light Up Pancreatic Cancer Cells
    created Apr 18, 2008 | popularity not rated yet | comments 0
  • Quantum Rods and Dots Image Cancer Cells
    created Feb 26, 2007 | popularity not rated yet | comments 0
  • Transforming nanowires into nano-tools using cation exchange reactions
    created Oct 23, 2009 | popularity not rated yet | comments 0
  • Tiny technology may yield major finds -- and possible perils
    created Oct 13, 2009 | popularity not rated yet | comments 0
  • Physicists Demonstrate Three-Color Entanglement
    created Oct 07, 2009 | popularity not rated yet | comments 0


Other News

Research helps overcome barrier for organic electronics

Research helps overcome barrier for organic electronics

Nanotechnology / Nanomaterials

created 10 hours ago | popularity 4.8 / 5 (6) | comments 0

(PhysOrg.com) -- Electronic devices can't work well unless all of the transistors, or switches, within them allow electrical current to flow easily when they are turned on. A team of engineers has determined ...


Argonne 'homegrown' hybrid solar cell aims for low-cost power

Argonne 'homegrown' hybrid solar cell aims for low-cost power

Nanotechnology / Nanomaterials

created 13 hours ago | popularity 4 / 5 (6) | comments 1

(PhysOrg.com) -- Scientists at the U.S. Department of Energy’s (DOE) Argonne National Laboratory have refined a technique to manufacture solar cells by creating tubes of semiconducting material and then "growing" ...


carbon fiber

Ultra-Long Carbon Nanotubes Could Serve as Future Transmission Lines

Nanotechnology / Nanomaterials

created 17 hours ago | popularity 4.8 / 5 (17) | comments 12

(PhysOrg.com) -- When it comes to carbon nanotubes, the majority of research so far has focused on small-scale applications. But now, a team of researchers from Rice University has created carbon nanotubes ...


Scientists develop DNA origami nanoscale breadboards for carbon nanotube circuits

Scientists develop DNA origami nanoscale breadboards for carbon nanotube circuits

Nanotechnology / Nanomaterials

created 18 hours ago | popularity 5 / 5 (6) | comments 0

In work that someday may lead to the development of novel types of nanoscale electronic devices, an interdisciplinary team of researchers at the California Institute of Technology has combined DNA's talent ...


Researchers invent new method for graphene growth

Researchers invent new method for graphene growth

Nanotechnology / Nanomaterials

created 21 hours ago | popularity 4.9 / 5 (19) | comments 0

(PhysOrg.com) -- A Cornell research team has invented a simple way to make graphene electrical devices by growing the graphene directly onto a silicon wafer.