Negative Refraction of Visible Light Demonstrated; Could Lead to Cloaking Devices

March 23, 2007

For the first time, physicists have devised a way to make visible light travel in the opposite direction that it normally bends when passing from one material to another, like from air through water or glass. The phenomenon is known as negative refraction and could in principle be used to construct optical microscopes for imaging things as small as molecules, and even to create cloaking devices for rendering objects invisible.

In the March 22 in the online publication Science Express, California Institute of Technology applied physics researchers Henri Lezec, Jennifer Dionne, and Professor Harry Atwater, will report their success in constructing a nanofabricated photonic material that creates a negative index of refraction in the blue-green region of the visible spectrum. Lezec is a visiting associate in Atwater's Caltech lab, and Dionne is a graduate student in applied physics.

According to Lezec, the key to understanding the technology is first in understanding how light normally bends when it passes from one medium to another. If a pencil is placed in a glass of water at an angle, for example, it appears to bend upward and outward if we look into the water from a vantage point above the surface. This effect is due to the wave nature of light and the normal tendency of different materials to disperse light in different ways-in this case, the materials being the air outside the glass and the water inside it.

However, physicists have thought that, if new optical materials could be constructed at the nanoscale level in a certain way, it might be possible to make the light bend at the same angle, but in the opposite direction. In other words, the pencil angled into the water would appear to bend backward as we looked at it.

The details are complicated, but have to do with the speed of light through the material itself. Researchers in recent years have created materials with negative diffraction for microwave and infrared frequencies. These achievements have exploited the relatively long wavelengths at those frequencies--the wavelength of microwaves being a few centimeters, and that of infrared frequencies about the width of a human hair. Visible light, because its wavelength is at microscopic dimensions--about one-hundredth the width of a hair--has defeated this conventional approach.

Dionne, one of the lead authors, says that the breakthrough is made possible by the Atwater lab's work on plasmonics, an emerging field that "squeezes" light with specially designed materials to create a wave known as a plasmon. In this case, the plasmons act in a manner somewhat similar to a wave carrying ripples across the surface of a lake, carrying light along the silver-coated surface of a silicon-nitride material, and then across a nanoscale gold prism so that the light reenters the silicon-nitride layer with negative refraction.

Thus, the process is not the same as the one used for negative refraction of microwaves and infrared radiation, but it still works, says Dionne. And this discovery is particularly exciting because visible light, as its name suggests, is the wavelength associated with the world of objects we see, provided they are not too small.

"Maybe you could create a superlens that can beat the diffraction limit," says Dionne. "You might be able to see DNA and protein molecules clearly just by looking at them, without having to use a more complicated method like X-ray crystallography."

Atwater, who is the Howard Hughes Professor and professor of applied physics and materials science at Caltech, says the plasmonic technique indeed has potential for a compact "perfect lens" that could have a huge number of biomedical and other technological applications. "Once the light coming from a nearby object passes through the negative-refraction material, it would be possible to recover all the spatial information," he says, adding that the loss of this information is why there is ordinarily a limit to the size of an object that can be seen in a microscope.

Even more tantalizing is the possibility of an optical "invisibility cloak" device that would surround an object and bend light in such a way that it would be perfectly refocused on the opposite side. This would provide perfect invisibility for the object inside the cloak, in a manner similar to the cloaks used by Harry Potter or the Klingons in the old Star Trek television series.

"Of course, anyone inside the cloak would not be able to see out," Atwater says.

"But maybe you could have some small windows," Dionne adds.

Source: Caltech


print this article email this article download pdf blog this article bookmark this article     Stumble it Digg this share on Facebook retweet share on Reddit add to delicious
Rate this story - 4.4 /5 (106 votes)

Rank Filter

Move the slider to adjust rank threshold, so that you can hide some of the comments.


Display comments: newest first

  • lengould100 - Jun 25, 2008
    • Rank: not rated yet
    "adding that the loss of this (spatial) information is why there is ordinarily a limit to the size of an object that can be seen in a microscope. "

    I thought it had more to do with the fact that wave-fronts of visible light are significantly larger than molecules or atoms. Trying to learn the characteristics of a teacup-sized object is a lot easier by probing it with a pencil than by probing it with a telephone pole.

March 23, 2007 all stories

Comments: 1

4.4 /5 (106 votes)
  • Stumble this up

  • Digg this

  • share this

  • hide
  • Related Stories




  • hide
  • Relevant PhysicsForums posts

  • Measuring impact force of an air gun pellet on a dilatant mixture
    created 3 hours ago
  • Excel projectile motion, help!
    created 4 hours ago
  • Ampere's Law (enclosed current?)
    created 10 hours ago
  • About physical equations
    created 15 hours ago
  • rotating objects?
    created 15 hours ago
  • spining and weight loss
    created 15 hours ago
  • More from Physics Forums - General Physics

Other News

Stars Fueled by Dark Matter Could Hold Secrets to the Universe

Stars Fueled by Dark Matter Could Hold Secrets to the Universe

Physics / General Physics

created 20 hours ago | popularity 4.5 / 5 (32) | comments 21

(PhysOrg.com) -- The first stars in the universe may have been very different from the stars we see today, yet they may hold clues to understanding some of the mysterious features of the universe. These "dark ...


Compressing photonic signals for greater bandwidth

Compressing photonic signals for greater bandwidth

Physics / Optics & Photonics

created 13 hours ago | popularity 4 / 5 (2) | comments 3

Cornell researchers have developed an ingenious method to time-compress optical signals. The process could enable optical communication systems to carry many more bits per second or could also be used to generate ...


Second Law of Thermodynamics May Explain Economic Evolution

Second Law of Thermodynamics May Explain Economic Evolution

Physics / General Physics

created Nov 02, 2009 | popularity 4.1 / 5 (20) | comments 22

(PhysOrg.com) -- Terms such as the "invisible hand," laissez-faire policy, and free-market principles suggest that economic growth and decline in capitalist societies seem to be somehow self-regulated. Now, ...


Gamma-ray photon race ends in dead heat; Einstein wins this round

Gamma-ray photon race ends in dead heat; Einstein wins this round

Physics / General Physics

created Oct 28, 2009 | popularity 4.9 / 5 (33) | comments 60

Racing across the universe for the last 7.3 billion years, two gamma-ray photons arrived at NASA's orbiting Fermi Gamma-ray Space Telescope within nine-tenths of a second of one another. The dead-heat finish ...


High-performance plasmas may make reliable, efficient fusion power a reality

High-performance plasmas may make reliable, efficient fusion power a reality

Physics / Plasma Physics

created Nov 02, 2009 | popularity 4.7 / 5 (32) | comments 19

In the quest to produce nuclear fusion energy, researchers from the DIII-D National Fusion Facility have recently confirmed long-standing theoretical predictions that performance, efficiency and reliability ...