First Galileo signals transmitted by GIOVE-A

GIOVE-A was placed in orbit (altitude 23,260 km) by a Soyuz-Fregat rocket operated by Starsem on 28 December last from the Baikonur cosmodrome. The prime contractor, Surrey Satellite Technology Limited, then successfully deployed the 7-metre solar array panels, commissioned the satellite platform and prepared the payload for tests from its Mission Control Centre. These activities on GIOVE-A drew on the joint efforts of ground stations deployed at RAL (UK), Bangalore (India) and Kuala Lumpur (Malaysia) for uploading of the onboard computer software, deployment of the two solar panels and placing of the satellite in sun-acquisition mode.

All the platform systems underwent functional checks and the satellite was then put in its nominal Earth-pointing attitude and orbit control mode. This platform commissioning phase was successfully completed by 9 January.

On 10 January, payload commissioning started from the SSTL Mission Control Centre with the objective of verifying that all the units in the navigation payload were functioning properly.

On 12 January, the first Galileo navigation signals were transmitted by GIOVE-A. These were received and analysed by the Galileo receivers using the 25-metre diameter dish of the Chilbolton Observatory Facilities for Atmospheric and Radio Research (UK) and the ESA Station in Redu (Belgium). The various Galileo signal modes will now be generated sequentially using the various GIOVE-A payload chains. Payload commissioning activities are planned to be completed by mid-February.

Additional measurement campaigns will then be carried out to assess the medium earth orbit radiation environment, characterise the performance of the on-board clocks and perform signal-in-space experimentation.

Source: ESA